Home SiteMap Typical Mechanical Seal
position: home page » products » Typical Mechanical Seal

Typical Mechanical Seal

Mechanical seals"equal to"Burgmann seals,John Crane seals, Flygt seals, Grundfos seals,Roten seals,Chesterton seals,Lidering,etc.

We can design according to the specific requirements and conditions of operation.Our staff can show you how to reduce your production costs by supplying you with quality repair that can reduce your cost to 50% or lower on pump mechanical seal replacement and repair.

JULONG offers mechanical seals for process pumps with high reliability and an excellent value for money. Within the production range are the following types of mechanical seals as defined by API 682 Standard,ISO3069 Standard and DIN 24960 Standard.

 

Products

Select to
  • TYPE JL891
    TYPE JL891
    mechanical seal with Siliconed graphite(SIC+SI+C) ring
  • TYPE JL950
    TYPE JL950
    Robust,general purpose,unbalanced pusher type seal capable of many shaft-sealing duties.The type 950 drives direct from the shaft,and is also available with a short,non-pinned seat as type 950N
  • TYPE JL960
    TYPE JL960
    unbalanced pusher type seal same with lidering
  • TYPE JL970
    TYPE JL970
    Robust,general purpose,unbalanced pusher type seal capable of many shaft-sealing duties. The type 970 drives from the shaft via the drive collar with grub screws inserted in the coil tail.Type 970 is also available with a shot,non-pinned seat as type 970N.
  • TYPE JLM2
    TYPE JLM2
    mechanical seal
  • TYPE JLM3
    TYPE JLM3
    Single-Spring Mechanical Seals
  • TYPE JLRL
    TYPE JLRL
    Special mechanical seal
  • TYPE JLMG1&JLMG12&JLMG13
    TYPE JLMG1&JLMG12&JLMG13
    Rubber bellows mechanical seal, unbalanced, single spring, independent on direction of rotation, with a wide non-DIN cross-section,for optimum flexibility and durability. Commonly supplied with either G60 or with a variety of 'O' Ring mounted seats.
  • TYPE M7N
    TYPE M7N
    Wave-spring,o-ring mounted seal with shrink fitted face,commonly utilised in the european chemical process industries. Manufactured to suit DIN 24960(EN12756) dimensions.Supplied with the type 8DIN Long seat standard,but also available with other seats.
  • TYPE JL21&JL24
    TYPE JL21&JL24
    single spring mechanical seal
  • TYPE JL155 JL155 DIN
    TYPE JL155 JL155 DIN
    single spring mechanical seal
  • TYPE JL40
    TYPE JL40
    mechanicals pump seals
  • TYPE JL1A
    TYPE JL1A
    single spring O-Ring mounted Seal
  • TYPE H7N
    TYPE H7N
    single spring mechanical seal
12
See more: OEM Seal  
Rubber Molded Products, Silicone Products,Rubber Tube, Mechanical Seal Manufacturer,Rubber Diaphragm, Rubber Impeller Pump, Rubber Aluminum Wheels, Bushing and Mounts, Blow Plastic Products, Rubber Impeller For Marine,Custom Rubber Mouldings, Rubber Sealing Technology, Passed Life Test Rubber, Silicon Carbide Ring(RBSIC),Peteresa Sports   Forgingparts  Nodinson Electronics CeramicSanitary Ware  China mops
CopyRight ® Ningbo Julong Rubber Plastic & Mechanical Electro Co.,Ltd. Gold Member Of soocuu.com Friend Link XML SiteMap